Re: hint

[ Follow Ups ] [ Post Followup ] [ TubeNet BBS ] [ FAQ ]

Posted by Gerald J. on January 28, 2001 at 16:46:13:

In Reply to: hint posted by Joe -economical- S. on January 28, 2001 at 16:12:40:

Are you sure of that last decimal place? .115 is not a standard size in USA or Europe. Might it need to be 0.118 or 3mm? Although #32 drill rod is available from for under $2 for a 3 foot length. It can be heat treated but is plenty strong and hard without that.

I'd sure expect a Miraphone to be made with metric materials, not USA number drill sizes. Metric nuts and dies are common stock in local hobby shops with a strong train interest.

Gerald J.

Follow Ups: